Directions for Scotts Edgeguard Mini Fertilizer Spreader
- Setting the Spreader. Place the spreader on a flat surface, such as a driveway or sidewalk.
- Use around the Perimeter. Slide the EdgeGuard lever on the rear of the spreader to the "On" position.
- Use in Lawn Center.
- Spreader Cleanup Instructions.
.
In this way, what setting should I use on my Scotts spreader?
With a handheld broadcast spreader, Scotts recommends a setting of 4 when overseeding or seeding a new lawn but suggests that the sower make two perpendicular passes for new areas. For drop spreaders, use a setting of 8 1/2 for overseeding and a bare-lawn setting of 12 1/2.
Secondly, how is fertilizer spread through broadcast spreader? How to Apply Lawn Fertilizer
- Set the spreader settings to correspond to the amount of fertilizer you want to apply.
- Place the spreader over a hard surface (like a driveway or walkway) and fill it with fertilizer.
- Spread fertilizer over the edges of the lawn first.
Also asked, what do the numbers mean on a Scotts spreader?
If it is a Scotts basic broadcast spreader, the number represents the number of pounds of fertilizer placed over 1000 sq ft.
Can you spread compost with a broadcast spreader?
For spreading compost or topsoil, you will have a hard time with a broadcast spreader. You might be able to get by with a peat roller if you have finely screened topsoil or compost.
Related Question AnswersCan you reuse Scotts Snap bags?
You can reuse the bag once your initial purchase product is gone. Why toss the bag in the trash, refill with other products and snap bag back on.Can you refill Scotts Snap bags?
The bags can be refilled but empty bags are not available.Can you use a drop spreader for topsoil?
You can spread topsoil evenly and accurately over the lawn by using a drop-spreader, or you can spread topsoil simply by flinging it with a shovel.What is a drop spreader?
Drop spreaders are made up of a bucket-type container, usually mounted on two wheels, with a raised handle so you can push. As you walk, the spreader drops the product directly on the ground beneath. Drop spreaders work best for small lawns or areas that need precise applications.How do you make a homemade fertilizer spreader?
For small jobs, create a hand-held spreader.How to Make a Fertilizer & Sand Spreader
- Clean the plastic coffee container with soapy water.
- Drill holes on the bottom of the container, spacing the holes approximately 1 inch from each other.
- Add the fertilizer or sand to the container.
How do you calibrate a spreader?
To calibrate your spreader for an application of fertilizer to your lawn:- Determine the amount of fertilizer needed for 100 sq. ft.
- Place this amount in the spreader.
- Mark off the area. For a rotary spreader, use a 10-foot by 10-foot area (100 sq.
- Apply using the suggested setting.
What does overseeding mean?
Overseeding is the planting of grass seed directly into existing turf, without tearing up the turf, or the soil. It's an easy way to fill in bare spots, improve the density of turf, establish improved grass varieties and enhance your lawn's color.Can I use a drop spreader for grass seed?
Position your drop spreader near the edge of your yard and press the lever to engage it. Walk at a normal pace around the perimeter of your lawn to sow grass seed all along the edge.What should I set my lime spreader to?
Pelletized lime should be applied every other year (approximately 15 lbs./1,000 ft²) once you have your soil pH to its optimum level, which is between 6.0 and 6.5.Lime.
| Spreader | Setting |
|---|---|
| Prize Lawn (Broadcast) | 5 |
| Prize Lawn (Drop) | 11.5 |
| Central Quality (Broadcast) 600B, 700, 100A | 7 |
| Central Quality (Drop) 175, 185, 205 | 12 |
How much grass seed do I need to lay down?
Proper Application. In general, you only need between 10 and 12 seeds within each soil square inch for grass varieties like fescue (Festuca spp.) and perennial ryegrass (Lolium perenne) which are easily grown in U.S. Department of Agriculture plant hardiness zones 4 through 8 and 3 through 9, respectively.Can you use Scotts EZ Seed in a spreader?
Answer: Per the manufacturer, Scotts EZ Seed Patch and Repair Sun and Shade should be applied with a spreader.What do the numbers mean on a fertilizer spreader?
All fertilizer labels have three bold numbers. The first number is the amount of nitrogen (N), the second number is the amount of phosphate (P2O5) and the third number is the amount of potash (K2O). Phosphorus is provided as 0-46-0 and potash as 0-0-60 or 0-0-50.What is a Scotts drop spreader?
Spread product efficiently and effectively with Scotts® Turf Builder® Classic Drop Spreader. With a large capacity hopper and a heavy-duty frame for optimum stability, you can spread up to 10,000 sq. ft. Fully assembled and pre-calibrated, the Classic Drop Spreader comes ready to treat your lawn immediately.When should I spread Turf Builder?
Turf Builder products labeled "weed and feed" should be applied to a lawn that's already moist, so either water thoroughly the day before application or apply weed and feed products when the grass is still wet with dew. Weed and feed products work best when weeds are actively growing in the lawn.How do you apply Scotts fertilizer?
Scotts® Turf Builder® Southern Lawn Food- Apply. Apply to a wet or dry lawn on a calm day. For best results, use a Scotts® spreader.
- Clean Up. Apply this product only to your lawn and sweep any product that lands on the driveway, sidewalk, or street back onto your lawn.
- Enjoy. Lawn is safe to re-enter immediately after product is applied.
