Cleaning instructions for Philips Shaver series S7000 and S9000

1. Turn on your shaver and rinse it under a warm water tap.
2. Turn off the shaver and remove the top part of your shaving head.
3. Rinse the top part of your shaving head under warm running water for at least 30 seconds.

.

Also to know is, how do I fix my Philips Aquatouch shaver?

The travel lock on your Philips Shaver is activated To deactivate the travel lock, press the on/off button of your shaver for three to five seconds. Now try turning the shaver on again.

Subsequently, question is, how often should I clean my electric shaver? It is best to manually deep clean your shaver at least every week, with general cleaning after every shave. When cleaning, you must make sure that all hair and skin cells inside have been properly removed.

In respect to this, what can I use to clean my electric razor?

How to clean an electric shaver (step by step)

1. Remove most of the hairs from the shaving head.
2. Apply a bit of water to the shaving head, then pour a few drops of liquid soap over the foils/combs.
3. Turn the shaver on.
4. With the shaver still running, rinse the head generously with warm tap water.

How do I clean my Philips MultiGroom?

The easiest way to clean the trimmer would be to rinse it under a faucet. The trimmer is water resistant, so it won't be damaged by water. For more information, visit the Philips Norelco MultiGroom 3100 Troubleshooting Page. I have found that rinsing with water is quick and easy, but water has its risks.

Related Question Answers

How do you reset a Philips razor?

The replacement reminder is repeated at 7 to 10 successive shaves, depending on the model. In some models, you can reset the razor. Press and hold the On/Off button for approximately 10 seconds. The shaving unit symbol is automatically shown for 7 to 10 successive shaves and will then stop.

What is the orange light on my Philips shaver?

Charging lights The battery symbol on you Philips Shaver lights up to indicate the charging status of your shaver. When the battery is about to run out, the indicator blinks orange. Once your shaver is fully charged, the light stays on for 15 or 30 minutes and then automatically turns off to save energy.

Why is my shaver not working?

It is possible that your shaver does not turn on or move because it is dirty. There can be hair or dirt particles stuck inside it, causing the shaving heads to be blocked. To fix this problem, properly clean your shaver. If possible, remove the shaving head and clean your shaver from the inside as well.

How do you fix an electric shaver?

What Are the Steps to Electric Shaver Repair?

1. Unplug the appliance.
2. Remove the screen from the head and carefully clean it.
3. Remove the blade assembly from the oscillator assembly.
4. If your foil-head shaver requires lubrication, follow the manufacturer's instructions for doing so.

How do you remove the head of a Philips shaver?

How do I remove the shaving heads of my Philips shaver?

1. Pull the shaving head holder off the body of the shaving unit.
2. Twist the retaining rings inside your shaving head holder and pull them out one by one.
3. Remove the shaving heads from the shaving head holder.
4. Each shaving head consists of a cutter and a guard.
5. Put the shaving heads back into the shaving head holder.

How do I unlock my Aquatouch?

To activate the travel lock press the on/off button on your shaver for three seconds. When the travel lock is activated, a lock symbol flashes on your shaver. To deactivate the travel lock press the on/off button on your shaver for three seconds.

How do you unlock a Norelco shaver?

“How do you unlock the razor”

1. Activation: By pressing the on/off switch (4) for 3 seconds the shaver is locked.
2. .
3. I'm guessing you are referring to the razor head
4. There's a switch conveniently placed right where your thumb naturally holds the razor.

Can I use rubbing alcohol to clean my electric razor?

Clean and sanitize your electric razor with quick-drying isopropyl alcohol. Unplug and turn off the electric razor. Follow the manufacturer's instructions for your specific razor. Hold the electric razor over a sink and brush away any hair from the cutting blades with a razor-cleaning brush or an old toothbrush.

Should I wet my face before using an electric shaver?

To maximize comfort during the shave and the performance of your razor, you must ensure that your skin and shaver are as dry as possible. For this reason, do not wash/exfoliate your face or take a shower just before shaving. Also, if you have cleaned your razor with water make sure it is completely dry before using it.

How do you lubricate an electric shaver?

Spray the exposed blades and foil with a blast of lubricant. You should use the lubricant suggested by the manufacturer. Alternatively, you can add a few drops of mineral or baby oil to the blades and foil. Do not use heavy oils like motor oil or olive oil.

How do you sanitize a razor?

Soaking

1. Rinse off the blades with hot water.
2. Add a dab of dish soap to the blades, and scrub the razor with a toothbrush to remove any grime.
3. Wash the soap off the razor using hot water again, then apply a cleaning agent like rubbing alcohol or hydrogen peroxide.

Can you use soap with an electric shaver?

A wet/dry electric razor can be safely and easily cleaned with a bit of liquid soap and hot tap water. Just make sure to follow the manufacturer's instructions.

Can I use wd40 on my electric shaver?

If your shaver is jammed or is to dirty and full of residue ! then just grab a can of wd40 spray it and leave it for some time.It should clean away with a rinse of water. not only that wd40 lubrication will help prolong the life of your blades.

How do you clean a body groomer?

How do I clean my Philips Shaver?

1. Turn on your shaver and rinse it under a warm water tap.
2. Turn off the shaver and remove the top part of your shaving head.
3. Rinse the top part of your shaving head under warm running water for at least 30 seconds.
4. Carefully shake off excess water from your shaver and let it air dry.

Why does my electric razor smell?

Electric razors can develop musty smells. This generally comes from mold and mildew developing in the blades or in the actual mechanism. Mold and mildew form wherever there is excess water. Or store the razor in a closet outside your moist bathroom.

How long do electric shaver blades last?

What is the Typical Lifespan? Depending on the brand you purchase, high-quality electric razors can last from 5-10 years. If you are diligent and care for it properly, it can even surpass 10 years. However, if you decide to not maintain it, it could even last for only a few months.

When should I replace my electric shaver?

Replacement of the blades and cutters will vary depending on the model of razor you have; the manufacturer's manual will usually specify how often you need to change the blades. Generally, it is a good idea to replace electric razor heads and cutters about once every 12 months.

How often use Philips Smart clean?

If you use the SmartClean system weekly, then the cleaning fluid in a cartridge should be enough for three months. If you are a more regular user, then the cartridge will need to be replaced much earlier, possibly within a month.

How long does Philips Smart Clean take?

The third feature is that the shaver comes with the SmartClean System PRO that cleans, dries and lubricates the shaver by just pressing one button. The cleaning phase takes about 10 minutes, but the drying phase takes up to 4 hours. Although the cleaning process takes quite a while, it wasn't difficult to use.