A yellow triangle on your DSC ADT Alarm system is also known as a “trouble light.” That means if you see this symbol, your system has an issue that you need to resolve. A trouble light could mean 1 of 8 problems.

.

Also, what does the orange triangle mean on my alarm system?

The yellow triangle means that your alarm system is experiencing a trouble condition. This could be caused by a number of different possible factors, such as a low battery, an activated tamper or communication problems. Only certain alarm systems use a yellow triangle to indicate a trouble.

Similarly, how do you troubleshoot a DSC alarm system? How to Troubleshoot Problems on the DSC Home Security System

1. Press the pound key (#) to stop the security system from repeatedly beeping.
2. Press the star key (*) and then press the number 2 key.
3. Change the battery per the panel's instruction manual if a number 1 appears on the display or the 1 zone is illuminated.

Simply so, what does it mean when your alarm system says trouble?

A trouble signal (sometimes indicated in the alarm history by the abbreviation TR) indicates a possible problem or difficulty with your security system, such as a loose wire, a poorly aligned sensor or a low battery status.

What does the triangle warning light mean?

What does the Honda Warning Light Triangle with Exclamation Point Mean? It means that there is something wrong with your Honda vehicle's Vehicle Stability Assist (VSA®) system. This system helps to stabilize the vehicle during cornering if the car turns more or less than desired.

Related Question Answers

How do I reset DSC alarm memory?

To clear the memory, arm and disarm the system. Certain sensors (such as smoke detectors and glass break detectors) have to be reset after an alarm. To reset detectors, press and hold the RESET key () for 2 seconds. If a sensor fails to reset, it may still be detecting an alarm condition.

How do I silence my ADT low battery?

For many of our most popular systems, beeping alarms and low battery trouble beeps can be silenced by pressing the [OFF] or [#] buttons from the keypad. If this does not work, please refer to your system user's manual for specific instructions.

What does 103 Comm trouble mean?

When you get the 'Check 103 Long Range Radio' message on your Honeywell keypad it means that there is a problem with the cellualr communicator attached to your system. The trouble may be caused by a severe drop in signal strength.

How do you reset your alarm?

How to Reset a Home Alarm System

1. Check the manufacturer's website for installer instructions.
2. Check out do-it-yourself alarm support sites (see References below).
3. Locate the power source to the Main Control Panel.
4. Disconnect the backup battery in the Main Control Panel.
5. Leave power off for a minimum of five minutes.
6. Reconnect the battery leads.

What does trouble mean on DSC alarm?

3) Telephone line trouble. This indicates that the alarm panel is not able to detect the phone line connection. Please ensure that your telephone system is up and operational. If it is not, contact your telephone carrier to resolve.

How do I reset a DSC alarm system?

How to Reset a DSC Alarm After the Power Has Been Off

1. Open the access door on the unit.
2. Press and hold the "RESET" key for 2 seconds.
3. Press the buttons "*72" if the alarm does not reset after pressing the RESET button.
4. Check the sensors if it still does not turn off.

What are the reason for home security to fail?

There are a few very common reasons that most home security systems fail, which are listed below:

• False Alarms. False alarms cost the traditional home security industry millions of dollars each year.
• Lack of Battery Back-Up.
• Forgetting to Arm.

How do I stop my alarm panel from beeping?

How to Stop Your Security Alarm from Beeping

1. Locate the source of the beeping.
2. Call your alarm monitoring company.
3. Check the alarm system battery.
4. Disarm the alarm system.
5. If all else fails, call a technician.

What causes false alarms on home security systems?

The most common cause of false alarms is user error, which accounts for more than 80% of false alarms, according to the False Alarm Reduction Association (FARA).

How do you reset your house alarm after a power cut?

How to Reset a Home Alarm After a Power Outage

1. Locate the "System" or "System Status" button on your home alarm keypad.
2. Wait until the AC power is restored to your home.
3. Lift the cover of the circuit breaker box and find the breaker that controls your home alarm system.
4. Replace the backup battery in the home alarm keypad.

Why does my house alarm keep flashing?

The flashing light most commonly means there are power problems, from power being out completely to an electrical breaker that tripped. The trouble light may also flash if the time and date need to be reset or there is low battery power in the keypad.

Will a house alarm work without a battery?

You can now take the original battery with you when you go looking for a replacement. The alarm will still work without it. Keypad operated systems have the facility to enter an engineers code to allow the panel cover to be opened without this happening.

What does triangle mean on alarm?

The yellow triangle means that your alarm system is experiencing a trouble condition. This could be caused by a number of different possible factors, such as a low battery, an activated tamper or communication problems. Only certain alarm systems use a yellow triangle to indicate a trouble.

What is DSC security system?

Your DSC Security System is made up of a DSC control panel, one or more keypads and various sensors and detectors. The control panel, which is a metal cabinet, will be mounted out of the way in a utility closet or in the basement. The metal cabinet contains the system electronics, fuses and back up battery.