Press and hold the call control button for 5 or 6 seconds until the light starts flashing red and blue (some models flash red and white). Release the button and set the headset aside. Follow the pairing instructions for your cell phone or other Bluetooth device.
.
Similarly one may ask, how do you turn on Plantronics?
Answer
- Press the power button for about 5-6 seconds until the indicator light starts flashing red and blue.
- Press the volume up and volume down buttons at the same time.
- When you turn on the headset, it automatically goes into pairing mode (flashing red and blue) so that you can pair it with your phone or other device.
Subsequently, question is, why is my Plantronics headset not connecting? If the headset is listed in your cell phone's list of paired devices, but will not connect to the phone, please try the following: Delete the headset from your cell phone's list of paired devices. Power off the phone. After about 30 seconds, place the battery back in the phone.
Similarly, how do I pair my Plantronics Bluetooth headset?
- Hold the headband so it is aligned as shown and insert the headset into the headband.
- Rotate the headset up. NOTE You can rotate the in either direction, so you can wear it on the left or right ear.
- To optimize the position of the headset, push the headset in so the microphone is close to the corner of your mouth.
How do you reset a Plantronics headset?
Step 1: Press the Talk Button and push the Mute Button in for 5 seconds until the Talk Indicator Light begins to flash green. Release both buttons. Step 2: Press the Talk Button again and release. Step 3: The last step is to unplug the AC power adapter for 5 seconds, then reconnect.
Related Question AnswersHow do I connect my Plantronics headphones to my computer?
How do I pair a Plantronics headset with a Windows 7 PC?- Make sure your computer's Bluetooth chip supports the Headset or Handsfree Bluetooth profile (if your computer has a data-only Bluetooth profile, you cannot pair your headset to it).
- Place your headset into pairing mode.
How do I use my Plantronics headset?
Using your wireless headset with remote call answering accessory (Recommended and preferred)- Remove your Plantronics headset from the charging base and place it on your head.
- When a phone call comes in, press the on button on your headset and you'll be on the call (works up to about 350 feet away from your desk)
How do I turn off my Plantronics wireless headset?
How do I turn off the Explorer 320 headset? To turn off the Explorer 320, press and hold the Control button until the indicator light flashes red, and then release the button (if you are wearing the headset you will hear a high tone followed by a low tone followed by a mid tone).How do I charge my Plantronics headset?
To use your Bluetooth headset with your cellphone, you must first plug it into a household outlet to charge it.- Plug the small end of your Plantronics charger into the charging port on your Bluetooth headset.
- Insert the AC adapter into a wall outlet.
- Allow the headset to charge for at least 2 hours.
How do I reset my Plantronics Bluetooth?
Resetting the Pairing with the USB Adapter- Press and hold the power button on the headset until the indicator light begins to flash red and blue. This puts the headset in pairing mode.
- Press the pairing button on the USB adapter until the indicator light on the adapter begins to flash.
How do I pair my Plantronics Bluetooth headset to my phone?
Go to Settings menu on the Android phone. Ensure Bluetooth is enabled, and then tap Bluetooth to access the settings. Tap Search or Scan (depending on the phone) so the phone can locate the headset. Once the phone finds the headset, tap PLT_Legend to complete the pairing process.How do I pair Plantronics Bluetooth headphones?
To pair your BackBeat FIT to your phone: Activate Bluetooth on your phone and set it to discover new devices. To do so: iPhone users click Settings > Bluetooth > On. Android users click Settings > Wireless & Networks > Bluetooth: On > Scan for devices.How do I put my Plantronics 5200 in pairing mode?
Android Settings > Bluetooth: On > Scan for devices* NOTE *Menus may vary by device. 3 Select “PLT V5200 Series.” If necessary, enter four zeros (0000) for the passcode or accept the connection. Once successfully paired, you hear “pairing successful” and the headset LEDs stop flashing.How do I adjust my Plantronics headset?
- Hold the headband so it is aligned as shown and insert the headset into the headband.
- Rotate the headset up. NOTE You can rotate the in either direction, so you can wear it on the left or right ear.
- To optimize the position of the headset, push the headset in so the microphone is close to the corner of your mouth.
Why my Bluetooth is not connecting?
Solution 3: Restart Your Phone and the Device Switch on Bluetooth by pulling down the notification shade of your phone and tapping on the Bluetooth icon after your phone restarts. Make sure that the device is in pairing mode. Keep it close to your phone and give your phone some time to scan all the nearby devices.How do I pair my Plantronics headset to my iPhone?
To pair your Plantronics Bluetooth headset with your iPhone:- On your iPhone, press Settings > General > Bluetooth.
- If Bluetooth is turned Off, tap to turn it On.
- Place your Bluetooth headset into pairing mode.
- When you see your Plantronics device name, tap it to pair and connect.
